Long-Shift Power Engineered for High-Throughput Operations
The BlitzNXT 51.2V 460Ah lithium forklift battery stores 23.6kWh of fully usable energy and sustains a continuous 100A discharge current across the entire charge cycle — giving your 48V forklift fleet the endurance to run full shifts without mid-day charging interruptions. Where lead-acid batteries begin losing voltage and lifting speed hours before they reach empty, the BlitzNXT LiFePO4 chemistry holds voltage flat from the first pallet of the shift to the last, keeping performance consistent no matter how far into the workday you are. Long service life, minimal maintenance, and low per-cycle energy costs make it the financially sound choice for operations that run hard, every day.


460Ah of Capacity, Fully Managed — Cell by Cell
A battery with this much stored energy demands protection that operates at the same scale. The BlitzNXT 51.2V 460Ah battery integrates an intelligent BMS that tracks every cell individually, actively guarding against overcharge, over-discharge, short circuit, overcurrent, and thermal extremes in real time. The result is a battery that doesn’t just store energy — it manages it, protecting your investment across thousands of charge cycles without requiring manual intervention. At 45.3 × 16.9 × 16.0 in and 507 lbs, its elongated slim profile is specifically suited to narrow-aisle reach trucks and counterbalanced forklifts where compartment width is constrained but length is available.


Multi-Parameter Visibility for Multi-Shift Operations
When a single battery powers a forklift through back-to-back shifts, knowing its exact condition at every handoff matters. The BlitzNXT 51.2V 460Ah battery’s built-in LCD display delivers a complete status readout — real-time voltage, state of charge percentage, discharge current, individual cell data, and operating temperature — all on one screen, updated continuously. Shift supervisors can verify charge levels before assigning equipment, operators can check remaining capacity mid-task, and maintenance teams can track cell health trends over time. The information is always there, always current, and always actionable.


Built to Handle the Temperature Swings Real Warehouses Create
A 460Ah battery cycling through a facility that runs loading docks, freezer aisles, and ambient storage zones in the same shift faces a wider range of thermal conditions than most battery specs account for. The BlitzNXT 51.2V battery handles this with automatic low-temperature cut-off: charging stops at 0°C to protect cells from cold-charge damage, and discharge is restricted below -20°C to preserve long-term capacity. Both resume automatically when the temperature recovers — no operator reset, no manual override. With a charge range of 0–45°C, discharge capability up to 50°C, and a recommended storage window of 10–30°C, this battery is calibrated for the real conditions of industrial facilities, not just the ideal ones.


Connector Layout Designed for Fast, Error-Free Field Swaps
The BlitzNXT 51.2V 460Ah battery’s interface panel is laid out for speed and safety in demanding daily-use environments. The high-current SB350-style connectors handle discharge and charge circuits with the locking reliability that multi-shift operations require — no loose connections, no arcing risk from misaligned contacts. The SWITCH port enables clean system on/off control integration, the COM port supports external BMS communication for facilities running telematics or warehouse management systems, and the pressure relief valve provides passive safety for sealed enclosure integrity. Every interface point is engineered to be used correctly the first time, every time.


Narrow Profile. Full-Capacity Performance. Long-Term Value
The BlitzNXT 48V lithium forklift battery combines a space-efficient elongated form factor with the energy density and cycle durability that demanding material handling environments require. IP67 waterproof rated, backed by 3000+ deep charge cycles, and built with Grade-A LiFePO4 cells for a 12+ year service life, it fits where conventional large-format batteries cannot — without sacrificing the capacity your fleet needs to sustain productivity. For operations running narrow-aisle reach trucks, three-wheel counterbalanced forklifts, or any 48V platform where compartment geometry limits standard battery options, this is the solution that doesn’t ask you to choose between fit and performance.


TECH SPECS
| Item | Standard | Remark |
|---|---|---|
| Specification | 51.2V/460Ah | |
| Nominal voltage | 51.2V | |
| Capacity | 460Ah | |
| Minimum capacity | 440Ah | 0.2C(92A) discharge 2.0V/CELL |
| Size (L*W*H) | 1150*430*406mm | |
| Weight | About 230Kg | |
| Standard discharge | 100A | |
| Max Discharge current | 350A | |
| Discharge cut-off voltage | 40V | |
| Charge voltage | 57.6V | |
| Standard charge | 50A | |
| Max Charge current | 200A | SOC:0%-80% 25℃-45℃ |
| Resistance | ≤30mΩ | |
| Charge temperature range | 0~45℃ | |
| Discharge temperature range | -20~50℃ | |
| Storage temperature range | 10~30℃ | |
| Storage humidity | 5%~90% | |
| Charge Discharge interface | REMA320 ANDERSON350 | |
| Waterproof Rate | IP67 | |
| Shell material | Black iron box | |
| Cycle life | 3000+ time | Operating conditions: 0.2C/0.2C |

















Reviews
There are no reviews yet.