BlitzNXT 25.6V 280Ah (24V 280Ah) Forklift Lithium iron Battery | EVE LiFePO4 Cells | QR Verified | QC Tested | Local US Support

More Capacity. Less Weight. Better Value Per Cycle

At 280Ah and just 176 lbs, the BlitzNXT 25.6V 280Ah lithium forklift battery delivers 7.2kWh of usable energy in one of the lightest packages available at this capacity level. A sustained 100A discharge current keeps your 24V forklift running at a consistent speed and lifting force from the opening minutes of a shift to the final task — without the voltage drop that leads operators to compensate with slower travel speeds and reduced load cycles near the end of charge. Less battery weight also means more of your forklift’s rated capacity goes toward the actual load. Minimal maintenance, low energy costs, and an extremely long service life make this the sensible upgrade for 24V operations looking to reduce both downtime and ownership costs.

Lighter Build. Uncompromised Protection

Weighing in at just 176 lbs, the BlitzNXT 25.6V 280Ah battery achieves a level of energy density that makes it one of the most installation-flexible 24V lithium options in its class — but a lighter enclosure never means lighter protection. The integrated intelligent BMS continuously monitors every cell for overcharge, over-discharge, short circuit, overcurrent, and both low and high temperature extremes, responding instantly to protect both the battery and the connected forklift system. At 28.3 × 8.3 × 16.5 in, its ultra-narrow 8.3-inch width makes it compatible with battery compartments where wider packs simply will not fit, opening up lithium upgrade possibilities for forklifts that have historically been limited to lead-acid options.

Precise Data for a Battery That Earns

Its Place Every Shift When a battery is this well-matched to its application — right capacity, right weight, right footprint — the last thing you want is uncertainty about its condition. The BlitzNXT 25.6V 280Ah battery’s built-in LCD display gives operators and maintenance teams a clear, continuous view of pack voltage, state of charge, real-time current draw, individual cell balance, and temperature — all from one compact screen. Whether you’re confirming charge status at the start of a shift, checking remaining capacity before a long task, or reviewing cell health during a scheduled inspection, the information is accurate, immediate, and always accessible without any additional tools or connectivity.

176 lbs of Battery. Zero Tolerance for Cold-Weather Cell Damage

A lighter battery means each cell is working closer to its design limits to deliver the required capacity, which makes thermal protection especially important for preserving long-term performance. The BlitzNXT 25.6V 280Ah battery’s automatic low-temperature cut-off suspends charging when internal temperature drops below 0°C, preventing the electrochemical stress that cold-charging places on lithium cells and that compounds into measurable capacity loss over time. Discharge restriction below -20°C provides the same protection during operation. Both resume automatically once the temperature recovers. Safe charging up to 45°C, discharging up to 50°C, and a recommended storage range of 10–30°C give this battery a wide operational envelope that covers the full range of environments where 24V forklifts are commonly deployed.

Four Dedicated Interfaces. One Fully Integrated System

The BlitzNXT 25.6V 280Ah battery’s top-panel interface reflects a thoughtful approach to real-world installation flexibility. Separate DISCHARGE and CHARGING ports using high-current SB350-style connectors keep power circuits clearly segregated and allow independent connection of drive and charge systems without adapters or splitters. The SWITCH port provides clean system on/off control for facilities integrating battery management into equipment shutdown procedures. The COM port enables external BMS communication, allowing this battery to feed real-time cell data directly into fleet management systems or maintenance monitoring platforms. A pressure relief valve completes the panel, maintaining sealed enclosure safety under all operating conditions. Every interface has a specific function — and each one is built to the standard that daily industrial use demands.

The 24V Upgrade That Changes What Light Really Means

At 176 lbs, the BlitzNXT 24V lithium forklift battery redefines what a 24V battery swap feels like. Lead-acid packs at comparable capacity routinely weigh two to three times as much, adding dead weight that reduces effective payload capacity and makes battery exchange a two-person job. This battery changes that equation — IP67 waterproof, 3000+ deep charge cycles, Grade-A LiFePO4 cells, and 12+ years of service life in a package light enough to handle differently. For operations running walkie pallet jacks, order pickers, or small counterbalanced trucks where every pound of battery weight comes directly out of load capacity, the weight difference isn’t a convenience — it’s a measurable operational gain on every single lift.

TECH SPECS